SAE Quick Connectors

  • V32W plastic quick connectors NW26-ID26-90° for VDA Cooling Water  VDA QC

    V32W plastic quick connectors NW26-ID26-90° for VDA Cooling Water VDA QC

    Item:  V32W plastic quick connectors NW26-ID26-90° for VDA Cooling Water  VDA QC

    Media:  VDA Cooling Water

    Buttons: 2

    Size:  NW26-ID26-90°

    Hose fitted: PA 26.0×30.0

    Material: PA12+30%GF

    Operating Pressure: 0.5-2 bar

    Ambient Temprature:  -40°C to 120°C

     

  • P2F plastic quick connectors NG8NW8-90° NG SERIES Fuel System Liquid

    P2F plastic quick connectors NG8NW8-90° NG SERIES Fuel System Liquid

    Item:P2F plastic quick connectors NG8NW8-90° NG SERIES Fuel System Liquid

    Media:  NG SERIES Fuel System Liquid

    Size: NG8NW8-90°

    Hose fitted: PA8.0 x 10.0

    Material: PA12+30%GF

    Operating Pressure: 5-7 bar

    Ambient Temprature:  -40°C to 120°C

    Plastic quick connectors are a practical and efficient choice, offering convenience, light weight, cost-effectiveness, corrosion resistance, and a reliable seal.

    First and foremost, they are highly convenient. With their easy-to-use design, you can quickly connect and disconnect components without the need for complex tools or extensive technical knowledge. This saves time and effort in various applications, whether it’s in plumbing, pneumatic systems, or industrial setups.

    Plastic construction makes these connectors lightweight. This not only makes them easy to handle and install but also reduces the overall weight of the connected systems. This can be particularly beneficial in applications where weight is a concern, such as in portable equipment or in areas where structural support is limited.

    They are also often cost-effective. Compared to metal connectors, plastic quick connectors are generally less expensive to produce and purchase. This makes them an attractive option for projects with budget constraints.

    In addition, plastic quick connectors are resistant to corrosion. Unlike metal connectors that can rust or corrode over time when exposed to moisture or certain chemicals, plastic connectors maintain their integrity and functionality in a wide range of environments.

    Moreover, they can provide a tight seal. This helps prevent leaks and ensures the efficient transfer of fluids or gases, enhancing the reliability and performance of the connected systems.

     

  • C2W  Quick Connector Φ9.493/8〞-ID6-90° for water

    C2W Quick Connector Φ9.493/8〞-ID6-90° for water

    Item:  C2W  Quick Connector Φ9.493/8〞-ID6-90° for water

    Media: water

    Buttons: 2

    Size:  Φ9.493/8〞-ID6-90°

    Hose fitted: PA 6.0×8.0 or 5/16〞

    Material: PA12+30%GF

    Operating Pressure: 5 to 7 bar

    Temprature: -30°C to 120°C

    Plastic quick connector for automobiles have many advantages.

    1. Light, which helps reduce the weight of the vehicle and improve fuel economy.

    2.The plastic material is corrosion-resistant and can work stably in a variety of harsh environments.

    3.The cost is relatively low, cost-effective. The use method is as follows: the installation shall strictly follow the installation guide of the automobile manufacturer to ensure that the connection is firm. In daily use, check the working state of the regulator regularly.

    If any abnormality is found, it should be repaired or replaced in time. At the same time, avoid the regulator by external force impact and high temperature baking, to ensure its stable performance and service life.

  • B6F Fuel line Quick Connector Φ7.89-5/16″-ID6/7.89 TEE CONNECTOR SAE

    B6F Fuel line Quick Connector Φ7.89-5/16″-ID6/7.89 TEE CONNECTOR SAE

    Item:  B6F Fuel line Quick Connector Φ7.89-5/16″-ID6/7.89 TEE CONNECTOR SAE

    Media: Fuel system

    Buttons: 2

    Size:  Φ7.89-5/16″-ID6/7.89

    Hose fitted: PA 6.0×8.0 or 5/16〞,7.89 end piece

    Material: PA12+30%GF

    Operating Pressure: 5 to 7 bar

    Temprature: -30°C to 120°C

    Plastic quick connector for automobiles have many advantages.

    1. Light, which helps reduce the weight of the vehicle and improve fuel economy.

    2.The plastic material is corrosion-resistant and can work stably in a variety of harsh environments.

    3.The cost is relatively low, cost-effective. The use method is as follows: the installation shall strictly follow the installation guide of the automobile manufacturer to ensure that the connection is firm. In daily use, check the working state of the regulator regularly.

    If any abnormality is found, it should be repaired or replaced in time. At the same time, avoid the regulator by external force impact and high temperature baking, to ensure its stable performance and service life.

  • F6H plastic quick connectors Φ11.80-12 -ID12-90°  for SAE Hydraulic Brake

    F6H plastic quick connectors Φ11.80-12 -ID12-90° for SAE Hydraulic Brake

    Item: F6H plastic quick connectors Φ11.80-12 -ID12-90°  for SAE Hydraulic Brake

    Media:  SAE Hydraulic Brake

    Buttons: 2

    Size:   Φ11.80-12 -ID12-90°

    Hose fitted: PA 12.0×14.0 or 1/2〞

    Material: PA12+30%GF

    Operating Pressure: 3 bar

    Temprature:  -40°C to 120°C in continuous

  • F6F plastic quick connectors Φ11.80-12 -ID12-90°  for SAE Fuel System Liquid

    F6F plastic quick connectors Φ11.80-12 -ID12-90° for SAE Fuel System Liquid

    Plastic quick connector has many advantages in new energy vehicles. Its material is light, which helps to reduce the weight of the vehicle and improve the energy efficiency. Convenient installation, can quickly connect the pipeline, improve production efficiency. With good sealing, can effectively prevent liquid or gas leakage, to ensure the safety of the system operation. At the same time, it has strong corrosion resistance, and can adapt to the complex working environment of new energy vehicles. In addition, the cost of plastic fast plug joint is relatively low, which meets the performance requirements, helps to reduce the cost of vehicle manufacturing, and provides a reliable connection solution for the development of new energy vehicles and fuel system.

    Item: F6F plastic quick connectors Φ11.80-12 -ID12-90°  for SAE Fuel System Liquid

    Media:  Fuel System Liquid

    Buttons: 2

    Size:  Φ11.80-12 -ID12-90°

    Hose fitted: PA 12.0×14.0 or 1/2〞

    Material: PA12+30%GF

    Operating Pressure: 5 to 7 bar

    Temprature: -30°C to 120°C

  • F5F plastic quick connectors Φ11.80-12 -ID12-0°  for SAE Fuel System Liquid

    F5F plastic quick connectors Φ11.80-12 -ID12-0° for SAE Fuel System Liquid

    Item: F5F plastic quick connectors Φ11.80-12 -ID12-0°  for SAE Fuel System Liquid

    Media:  Fuel System Liquid

    Buttons: 2

    Size:   Φ11.80-12 -ID12-0°

    Hose fitted: PA 12.0×14.0 or 1/2〞

    Material: PA12+30%GF

    Operating Pressure: 5 to 7 bar

    Temprature: -30°C to 120°C

  • B32U 3 ways SAE end piece Plastic Quick Connector for Urea SCR System Φ7.89-5/16〞-ID5/7.89

    B32U 3 ways SAE end piece Plastic Quick Connector for Urea SCR System Φ7.89-5/16〞-ID5/7.89

    Plastic quick connector has many advantages in new energy vehicles. Its material is light, which helps to reduce the weight of the vehicle and improve the energy efficiency. Convenient installation, can quickly connect the pipeline, improve production efficiency. With good sealing, can effectively prevent liquid or gas leakage, to ensure the safety of the system operation. At the same time, it has strong corrosion resistance, and can adapt to the complex working environment of new energy vehicles. In addition, the cost of plastic fast plug joint is relatively low, which meets the performance requirements, helps to reduce the cost of vehicle manufacturing, and provides a reliable connection solution for the development of new energy vehicles and fuel system.

    Item: Plastic Quick Connector for Urea SCR System Φ7.89-5/16〞-ID5/7.89-3 ways  SAE

    Media: Urea SCR System

    Size:  Φ7.89-5/16〞-ID5/7.89-3 ways

    Hose fitted: PA 5.0×7.0,7.89 end piece

    Material: PA12+30%GF

    Working pressure :  5 to 7 bar

    Temprature: -40°C to 120°C

  • C14 Fuel Quick Connector Φ9.49-3/8″-ID3-0° SAE plastic quick connectors

    C14 Fuel Quick Connector Φ9.49-3/8″-ID3-0° SAE plastic quick connectors

    Item: Fuel Quick Connector Φ9.49-3/8″-ID3-0° SAE plastic quick connectors

    Media: Fuel system

    Buttons: 2

    Size:  Φ9.49-3/8″-ID3-0°

    Hose fitted: PA 3.0×5.0 or 3.35×5.35

    Material: PA12+30%GF

    Operating Pressure: 5 to 7 bar

    Temprature: -30°C to 120°C

  • B15U 3 ways SAE end piece Plastic Quick Connector for Urea SCR System Φ7.89-5/16〞-ID6/7.89

    B15U 3 ways SAE end piece Plastic Quick Connector for Urea SCR System Φ7.89-5/16〞-ID6/7.89

    Item: Plastic Quick Connector for Urea SCR System Φ7.89-5/16〞-ID6/7.89-3 ways  SAE

    Media: Urea SCR System

    Size:  Φ7.89-5/16〞-ID6/7.89-3 ways

    Hose fitted: PA 6.0×8.0,7.89 end piece

    Material: PA12+30%GF

    Working pressure :  5 to 7 bar

    Temprature: -40°C to 120°C

  • V22W plastic quick connectors NW26-ID26-90° for VDA Cooling Water

    V22W plastic quick connectors NW26-ID26-90° for VDA Cooling Water

    Item: V22W plastic quick connectors NW26-ID26-90° for VDA Cooling Water

    Media:  VDA Cooling Water

    Size:  NW26-ID26-0°

    Hose fitted: Rubber Hose ID26~ID30.0

    Material: PA66+30%GF

    Operating Pressure: 0.5-2 bar

    Ambient Temprature:  -40°C to 120°C

     

  • B4F Plastic Quick Connector for fuel System Φ7.89-5/16〞-ID7.3-0°  SAE

    B4F Plastic Quick Connector for fuel System Φ7.89-5/16〞-ID7.3-0° SAE

    Plastic quick coupling for vehicles have many advantages. First of all, cost-effective, affordable and reliable performance. Easy to operate, without complex tools can be quickly connected. Fast economy, save installation time and cost. Light weight, will not increase the excessive burden of the vehicle. At the same time, the plastic material has good corrosion resistance, can adapt to a variety of working environment, prolong the service life, for the vehicle pipeline connection provides a convenient, efficient and reliable solution.

    Item: B4F Plastic Quick Connector for fuel System Φ7.89-5/16〞-ID7.3-0°  SAE

    Media: Fuel System

    Button:2

    Size:   Φ7.89-5/16〞-ID6-45°  SAE

    Rubber Hose ID7.3

    Material: PA12+30%GF

    Working pressure :  5 to 7 bar

    Temprature: -30°C to 120°C

  • D1C plastic quick connectors Φ9.89-10-ID8-0°  for SAE Crankcase Breather Cooling Water

    D1C plastic quick connectors Φ9.89-10-ID8-0° for SAE Crankcase Breather Cooling Water

    Item: D1C plastic quick connectors Φ9.89-10-ID8-0°  for SAE Crankcase Breather Cooling Water

    Media:  Crankcase Breather Cooling Water

    Buttons: 2

    Size: Φ9.89-ID8-0°

    Hose fitted: PA 8.0×10.0 or 3/8〞

    Material: PA66+30%GF

    Operating Pressure: 5 to 7 bar

    Temprature: -30°C to 120°C

  • B30F Plastic Quick Connector for fuel System Φ7.89-5/16〞-ID6-45°  SAE

    B30F Plastic Quick Connector for fuel System Φ7.89-5/16〞-ID6-45° SAE

    Plastic quick coupling for vehicles have many advantages. First of all, cost-effective, affordable and reliable performance. Easy to operate, without complex tools can be quickly connected. Fast economy, save installation time and cost. Light weight, will not increase the excessive burden of the vehicle. At the same time, the plastic material has good corrosion resistance, can adapt to a variety of working environment, prolong the service life, for the vehicle pipeline connection provides a convenient, efficient and reliable solution.

    Item: B30F Plastic Quick Connector for fuel System Φ7.89-5/16〞-ID6-45°  SAE

    Media: Fuel System

    Button:2

    Size:   Φ7.89-5/16〞-ID6-45°  SAE

    Hose fitted: PA 6.0×8.0 or 5/16〞

    Material: PA12+30%GF

    Working pressure :  5 to 7 bar

    Temprature: -30°C to 120°C

  • G6F 180° 0°  plastic quick connectors Φ15.82-5/8〞-ID14.3-0° for SAE Fuel System Liquid

    G6F 180° 0° plastic quick connectors Φ15.82-5/8〞-ID14.3-0° for SAE Fuel System Liquid

    Item: G6F 180° 0° elbow plastic quick connectors Φ15.82-5/8〞-ID14.3-0° for SAE Fuel System Liquid

    Media:  SAE Fuel System Liquid

    Buttons: 2

    Size:  Φ15.82-5/8〞-ID14.3-0°

    Hose fitted: Rubber Hose ID14.3

    Material: PA12+30%GF

    Operating Pressure: 5-7 bar

    Ambient Temprature:  -30°C to 120°C

     

  • B24F Plastic Quick Connector for fuel System Φ7.89-5/16〞-ID6-90°  SAE

    B24F Plastic Quick Connector for fuel System Φ7.89-5/16〞-ID6-90° SAE

    Plastic quick coupling for vehicles have many advantages. First of all, cost-effective, affordable and reliable performance. Easy to operate, without complex tools can be quickly connected. Fast economy, save installation time and cost. Light weight, will not increase the excessive burden of the vehicle. At the same time, the plastic material has good corrosion resistance, can adapt to a variety of working environment, prolong the service life, for the vehicle pipeline connection provides a convenient, efficient and reliable solution.

    Item: B24F Plastic Quick Connector for fuel System Φ7.89-5/16〞-ID6-90°  SAE

    Media: Fuel System

    1 Button

    Size:   Φ7.89-5/16〞-ID6-90°  SAE

    Hose fitted: PA 6.0×8.0 or 5/16〞

    Material: PA12+30%GF

    Working pressure :  5 to 7 bar

    Temprature: -30°C to 120°C

  • B26F Plastic Quick Connector for fuel System Φ7.89-5/16〞-ID6-0°  SAE

    B26F Plastic Quick Connector for fuel System Φ7.89-5/16〞-ID6-0° SAE

    Plastic quick coupling for vehicles have many advantages. First of all, cost-effective, affordable and reliable performance. Easy to operate, without complex tools can be quickly connected. Fast economy, save installation time and cost. Light weight, will not increase the excessive burden of the vehicle. At the same time, the plastic material has good corrosion resistance, can adapt to a variety of working environment, prolong the service life, for the vehicle pipeline connection provides a convenient, efficient and reliable solution.

    Item: B26F Plastic Quick Connector for fuel System Φ7.89-5/16〞-ID6-0°  SAE

    Media: Fuel System

    1 Button

    Size:   Φ7.89-5/16〞-ID6-0°  SAE

    Hose fitted: PA 6.0×8.0 or 5/16〞

    Material: PA12+30%GF

    Working pressure :  5 to 7 bar

    Temprature: -30°C to 120°C

  • V35W plastic quick connectors NW12-ID12-0° Adaptor for VDA Cooling Water  VDA QC

    V35W plastic quick connectors NW12-ID12-0° Adaptor for VDA Cooling Water VDA QC

    Item:  V35W plastic quick connectors NW12-ID12-0° Adaptor for VDA Cooling Water  VDA QC

    Media:  VDA Cooling Water

    Buttons: 2

    Size:  NW26-ID26-0°

    Hose fitted: NW12  to Rubber Hose ID12~ID18.0

    Material: PA12+30%GF

    Operating Pressure: 0.5-2 bar

    Ambient Temprature:  -40°C to 120°C

     

  • V19W plastic quick connectors NW26-ID25-0° for VDA Cooling Water

    V19W plastic quick connectors NW26-ID25-0° for VDA Cooling Water

    Item:  V19W plastic quick connectors NW26-ID25-0° for VDA Cooling Water

    Media:  VDA Cooling Water

    Buttons: 2

    Size:  NW26-ID25-0°

    Hose fitted: PA 25.0×29.0

    Material: PA12+30%GF

    Operating Pressure: 0.5-2 bar

    Ambient Temprature:  -40°C to 120°C

     

  • F2W plastic quick connectors Φ11.80-12 -ID10-0°  for SAE Cooling Water

    F2W plastic quick connectors Φ11.80-12 -ID10-0° for SAE Cooling Water

    Item: F2W plastic quick connectors Φ11.80-12 -ID10-0°  for SAE Cooling Water

    Media:  SAE Cooling Water

    Buttons: 2

    Size:   Φ11.80-12 -ID10-0°

    Hose fitted: PA 10.0×12.0

    Material: PA12+30%GF

    Operating Pressure: 0.5-2 bar

    Temprature:  -40°C to 120°C in continuous

  • C19F Fuel Quick Connector Φ9.49-3/8″-ID8-45° SAE plastic quick connectors

    C19F Fuel Quick Connector Φ9.49-3/8″-ID8-45° SAE plastic quick connectors

    Item: Fuel Quick Connector Φ9.49-3/8″-ID8-45° SAE plastic quick connectors

    Media: Fuel system

    Buttons: 2

    Size:  Φ9.49-3/8″-ID8-45°

    Hose fitted: PA 8.0×10.0 or 3/8〞

    Material: PA12+30%GF

    Operating Pressure: 5 to 7 bar

    Temprature: -30°C to 120°C

  • G1F 90° elbow plastic quick connectors Φ15.82-5/8〞 -ID14-90° for SAE Fuel System Liquid

    G1F 90° elbow plastic quick connectors Φ15.82-5/8〞 -ID14-90° for SAE Fuel System Liquid

    Item:G1F 90° elbow plastic quick connectors Φ15.82-5/8〞 -ID14-90° for SAE Fuel System Liquid

    Media:  SAE Fuel System Liquid

    Buttons: 2

    Size:  Φ15.82-5/8〞 -ID14-90°

    Hose fitted: PA 14.0×16.0 or 5/8〞

    Material: PA12+30%GF

    Operating Pressure: 5-7 bar

    Ambient Temprature:  -30°C to 120°C

     

  • D1W plastic quick connectors Φ9.89-10-ID8-0°  for SAE Cooling Water

    D1W plastic quick connectors Φ9.89-10-ID8-0° for SAE Cooling Water

    Item: D1W plastic quick connectors Φ9.89-10-ID8-0°  for SAE Cooling Water

    Media:  Cooling Water

    Buttons: 2

    Size: Φ9.89-ID8-0°

    Hose fitted: PA 8.0×10.0 or 3/8〞

    Material: PA12+30%GF

    Operating Pressure: 5 to 7 bar

    Temprature: -30°C to 120°C

  • B39 Plastic Quick Connector for Urea SCR System Φ7.89-5/16〞-ID4-0  SAE

    B39 Plastic Quick Connector for Urea SCR System Φ7.89-5/16〞-ID4-0 SAE

    Item: B39 Plastic Quick Connector for Urea SCR System Φ7.89-5/16〞-ID4-0  SAE

    Media: Urea SCR System

    Size:  Φ7.89-5/16〞-ID4-0  SAE

    Hose fitted: PA 4.0×6.0

    Material: PA12+30%GF

    Working pressure :  5 to 7 bar

    Temprature: -40°C to 120°C

    Plastic Tee Connector for automobiles have many advantages. First, it is light, which helps reduce the weight of the vehicle and improve fuel economy. Secondly, the plastic material is corrosion-resistant and can work stably in a variety of harsh environments. Moreover, the cost is relatively low, cost-effective. The use method is as follows: the installation shall strictly follow the installation guide of the automobile manufacturer to ensure that the connection is firm. In daily use, check the working state of the regulator regularly. If any abnormality is found, it should be repaired or replaced in time. At the same time, avoid the regulator by external force impact and high temperature baking, to ensure its stable performance and service life.

  • C6 Fuel Quick Connector Φ9.49-3/8″-9.49-7.89  SAE

    C6 Fuel Quick Connector Φ9.49-3/8″-9.49-7.89 SAE

    Item: C6 Fuel Quick Connector Φ9.49-3/8″-9.49-7.89  SAE

    Media: Fuel system

    Buttons: 2

    Size: Φ9.49-3/8″-9.49-7.89

    Hose fitted: 9.49/7.89 end piece

    Material: PA12+30%GF

    Operating Pressure: 5 to 7 bar

    Temprature: -30°C to 120°C

    Plastic quick connector for automobiles have many advantages.

    1. Light, which helps reduce the weight of the vehicle and improve fuel economy.

    2.The plastic material is corrosion-resistant and can work stably in a variety of harsh environments.

    3.The cost is relatively low, cost-effective. The use method is as follows: the installation shall strictly follow the installation guide of the automobile manufacturer to ensure that the connection is firm. In daily use, check the working state of the regulator regularly.

    If any abnormality is found, it should be repaired or replaced in time. At the same time, avoid the regulator by external force impact and high temperature baking, to ensure its stable performance and service life.

  • G0F  Φ15.82-End Cap plastic quick connectors Liquid/Vapor/Fuel System

    G0F Φ15.82-End Cap plastic quick connectors Liquid/Vapor/Fuel System

    Item: G0F  Φ15.82-End Cap plastic quick connectors Liquid/Vapor/Fuel System

    Media: Liquid/Vapor/Fuel System

    Buttons: 2

    Size:   Φ15.82-End Cap

    Material: PA12+30%GF

    Operating Pressure: 5 to 7 bar

    Temprature: -30°C to 120°C

    The plastic quick connector end cap for automobiles has significant advantages. It is made of plastic material, light weight, easy to install and operate, will not increase the burden of the car. Plastic has a strong corrosion resistance, can adapt to the complex use of the automobile environment, prolong the service life. Its fast connection design, greatly improve the installation efficiency, save time and labor costs. The head is well sealed and can effectively prevent liquid or gas leakage and ensure the normal operation of all vehicle systems. In addition, the plastic quick joint head cost is low, cost-effective. At the same time, its appearance design is simple, and it does not take up too much space, providing convenience for the compact layout of the car.

  • V30W plastic quick connectors Adaptor NW26-ID25-0° for VDA Cooling Water

    V30W plastic quick connectors Adaptor NW26-ID25-0° for VDA Cooling Water

    Item:  V30W plastic quick connectors NW26-ID25-0° for VDA Cooling Water

    Media:  VDA Cooling Water

    Size:  NW26-ID25-0°

    Hose fitted: NW26 to PA 25.0×29.0

    Material: PA66+30%GF

    Plastic adapter for automobile has many advantages, and the application scenario in automobile is very wide. In the automotive fuel system, Can be used to connect the tubing with different pipe diameter, Ensure the smooth delivery of the fuel oil, Prevent fuel oil leakage; In the cooling system, Can connect the coolant line, Ensure the normal circulation of the coolant between the engine and the radiator; In the braking system, Be available as a connector for pipe fittings, Enable the brake fluid to accurately transfer the pressure, Ensure the normal operation of the braking system; in addition, In the electrical systems of the cars, Plastic adapters can be connected to a variety of wires and harnesses, To realize the circuit conduction and signal transmission, For example, connect the connector of the vehicle charger to the interface of the car cigarette lighter, Charging the electronic devices; And in the installation of some car interior parts, Such as the connection of the air-conditioning and ventilation pipes, Plastic adapters also play an important role, It enables the pipes to be tightly connected, Ensure a smooth air flow, Provide a comfortable environment inside the car.
    In the future, the plastic adapters used for automobiles will show the following development trends:
    Lightweight: With the continuous improvement of the requirements for energy conservation and emission reduction in the automobile industry, lightweight has become an important development direction. The plastic adapter itself is light in weight, in line with this trend, and will be further optimized in material selection and structural design in the future to achieve more extreme lightweight, help reduce the weight of the vehicle, improve fuel efficiency or increase the range of electric vehicles.
    High performance: the working environment of the car is complex and harsh, and the performance requirements of the adaptors are constantly improved. Future plastic adapters will have higher strength, better heat resistance, corrosion resistance and aging resistance, to adapt to various extreme conditions, to ensure the reliability and stability in the long-term use process. For example, new high-performance engineering plastics may be developed or modified to treat existing plastics to be used to greatly improve their performance.
    Multi-function integration: In order to improve the integration and space utilization of automotive parts, plastic adapters may integrate more functions. For example, in addition to the connection function, it may also have sealing, shock absorption, noise reduction and other functions. Through the integrated design, reduce the number of parts, reduce the installation difficulty and cost, while improving the performance and quality of the vehicle.
    Intelligence: With the development of automobile intelligence, plastic adapters may also incorporate intelligent elements. For example, with the sensor function, it can monitor the pressure, temperature, flow and other parameters in real time, and transmit data to the control system of the car, so as to find potential problems in time or realize accurate control and optimization of the relevant system.
    Green environmental protection: in the background of increasing environmental awareness, the production and use of plastic adapters will pay more attention to environmental protection. On the one hand, in the selection of materials, it will tend to use recyclable and biodegradable environmental plastics to reduce the impact on the environment; on the other hand, in the production process, cleaner and energy-saving production processes to reduce energy consumption and pollutant emissions.

     

  • N3F N3V 145° plastic quick connectors Φ18.9-3/4〞-ID16.5-45° for SAE Fuel System Liquid Vapor

    N3F N3V 145° plastic quick connectors Φ18.9-3/4〞-ID16.5-45° for SAE Fuel System Liquid Vapor

    Item: N3F N3V 145° plastic quick connectors Φ18.9-3/4〞-ID16.5-45° for SAE Fuel System Liquid Vapor

    Media:  SAE Fuel System Liquid

    Buttons: 2

    Size:  Φ18.9-3/4〞-ID16.5-45°

    Hose fitted: PA 16.5×18.5

    Material: PA12+30%GF

    Operating Pressure: 5-7 bar

    Ambient Temprature:  -30°C to 120°C

    Plastic quick connectors offer several notable advantages.

    First, they are highly convenient. With their easy-to-use design, you can quickly connect and disconnect various components without the need for complicated tools or extensive technical knowledge. This saves time and effort in installation and maintenance processes.

    They are also lightweight. This characteristic makes them easy to handle and transport, reducing the overall burden on workers and facilitating installation in different locations.
    Plastic quick connectors are often corrosion-resistant. Unlike metal connectors that may rust or corrode over time when exposed to moisture or certain chemicals, plastic ones can maintain their integrity and functionality in a wide range of environments.
    Moreover, they can provide a secure connection. Despite being made of plastic, these connectors are designed to ensure a tight fit and prevent leaks or disconnections, ensuring the smooth operation of systems they are a part of.
    In addition, plastic quick connectors are cost-effective. They are generally less expensive than their metal counterparts while still offering reliable performance, making them an excellent choice for various applications where budget is a consideration.

     

  • P7F plastic quick connectors NG12NW12-0° NG SERIES Fuel System Liquid

    P7F plastic quick connectors NG12NW12-0° NG SERIES Fuel System Liquid

    Item:P7F plastic quick connectors NG12NW12-0° NG SERIES Fuel System Liquid

    Media:  NG SERIES Fuel System Liquid

    Size: NG12NW12-0°

    Hose fitted: PA 12.0 x 14.0

    Material: PA12+30%GF

    Operating Pressure: 5-7 bar

    Ambient Temprature:  -40°C to 120°C

    Plastic quick connectors are a practical and efficient choice, offering convenience, light weight, cost-effectiveness, corrosion resistance, and a reliable seal.

    First and foremost, they are highly convenient. With their easy-to-use design, you can quickly connect and disconnect components without the need for complex tools or extensive technical knowledge. This saves time and effort in various applications, whether it’s in plumbing, pneumatic systems, or industrial setups.

    Plastic construction makes these connectors lightweight. This not only makes them easy to handle and install but also reduces the overall weight of the connected systems. This can be particularly beneficial in applications where weight is a concern, such as in portable equipment or in areas where structural support is limited.

    They are also often cost-effective. Compared to metal connectors, plastic quick connectors are generally less expensive to produce and purchase. This makes them an attractive option for projects with budget constraints.

    In addition, plastic quick connectors are resistant to corrosion. Unlike metal connectors that can rust or corrode over time when exposed to moisture or certain chemicals, plastic connectors maintain their integrity and functionality in a wide range of environments.

    Moreover, they can provide a tight seal. This helps prevent leaks and ensures the efficient transfer of fluids or gases, enhancing the reliability and performance of the connected systems.

     

  • P8F plastic quick connectors NG12NW12-90° NG SERIES Fuel System Liquid

    P8F plastic quick connectors NG12NW12-90° NG SERIES Fuel System Liquid

    Item:P8F plastic quick connectors NG12NW12-90° NG SERIES Fuel System Liquid

    Media:  NG SERIES Fuel System Liquid

    Size: NG12NW12-90°

    Hose fitted: PA 12.0 x 14.0

    Material: PA12+30%GF

    Operating Pressure: 5-7 bar

    Ambient Temprature:  -40°C to 120°C

    Plastic quick connectors are a practical and efficient choice, offering convenience, light weight, cost-effectiveness, corrosion resistance, and a reliable seal.

    First and foremost, they are highly convenient. With their easy-to-use design, you can quickly connect and disconnect components without the need for complex tools or extensive technical knowledge. This saves time and effort in various applications, whether it’s in plumbing, pneumatic systems, or industrial setups.

    Plastic construction makes these connectors lightweight. This not only makes them easy to handle and install but also reduces the overall weight of the connected systems. This can be particularly beneficial in applications where weight is a concern, such as in portable equipment or in areas where structural support is limited.

    They are also often cost-effective. Compared to metal connectors, plastic quick connectors are generally less expensive to produce and purchase. This makes them an attractive option for projects with budget constraints.

    In addition, plastic quick connectors are resistant to corrosion. Unlike metal connectors that can rust or corrode over time when exposed to moisture or certain chemicals, plastic connectors maintain their integrity and functionality in a wide range of environments.

    Moreover, they can provide a tight seal. This helps prevent leaks and ensures the efficient transfer of fluids or gases, enhancing the reliability and performance of the connected systems.

  • B35F check valve backpressure valve clappet Plastic Fuel Quick Connector Φ7.89-5/16″-ID7-0° for SAE fuel system

    B35F check valve backpressure valve clappet Plastic Fuel Quick Connector Φ7.89-5/16″-ID7-0° for SAE fuel system

    Item: B35F check valve backpressure valve clappet Plastic Fuel Quick Connector Φ7.89-5/16″-ID7-0° for SAE fuel system

    Media: Fuel system

    Buttons: 2

    Size:  Φ7.89-5/16″-ID7-0°

    Hose fitted: PA 7.0×9.0

    Operating Pressure: 5 to 7 bar

    Temprature: -30°C to 120°C

    Detail Description:This plastic check valve used on automotive tubings and rubber hoses, it works on liquicd delivery on single directions, can effectively  make sure liquid flow to single direction,prevent reflux.

     

  • Plastic Male End Piece Nozzle Holder Φ7.89  for SAE VDA system

    Plastic Male End Piece Nozzle Holder Φ7.89 for SAE VDA system

    Item: ODM/OEM Plastic Male End Piece Nozzle Holder Φ7.89  for SAE VDA system

    Size: Φ7.89

    Hose fitted: Φ7.89

    Material: PA12+30%GF

    Working pressure :  5 to 7 bar

    Temprature: -30°C to 120°C

  • P6F plastic quick connectors NG12NW10-90° NG SERIES Fuel System Liquid

    P6F plastic quick connectors NG12NW10-90° NG SERIES Fuel System Liquid

    Item:P6F plastic quick connectors NG12NW10-90° NG SERIES Fuel System Liquid

    Media:  NG SERIES Fuel System Liquid

    Size: NG12NW10-90°

    Hose fitted: PA 10.0 x 12.0

    Material: PA12+30%GF

    Operating Pressure: 5-7 bar

    Ambient Temprature:  -40°C to 120°C

     

  • P5F plastic quick connectors NG12NW10-0° NG SERIES Fuel System Liquid

    P5F plastic quick connectors NG12NW10-0° NG SERIES Fuel System Liquid

    Item:P5F plastic quick connectors NG12NW10-0° NG SERIES Fuel System Liquid

    Media:  NG SERIES Fuel System Liquid

    Size: NG12NW10-0°

    Hose fitted: PA 10.0 x 12.0

    Material: PA12+30%GF

    Operating Pressure: 5-7 bar

    Ambient Temprature:  -40°C to 120°C

     

  • P3F plastic quick connectors NG12NW9-0° NG SERIES Fuel System Liquid

    P3F plastic quick connectors NG12NW9-0° NG SERIES Fuel System Liquid

    Item:P3F plastic quick connectors NG12NW9-0° NG SERIES Fuel System Liquid

    Media:  NG SERIES Fuel System Liquid

    Size: NG12NW9-0°

    Hose fitted: PA 9.0 x 11.0

    Material: PA12+30%GF

    Operating Pressure: 5-7 bar

    Ambient Temprature:  -40°C to 120°C

     

  • P4F plastic quick connectors NG12NW9-90° NG SERIES Fuel System Liquid

    P4F plastic quick connectors NG12NW9-90° NG SERIES Fuel System Liquid

    Item:P4F plastic quick connectors NG12NW9-90° NG SERIES Fuel System Liquid

    Media:  NG SERIES Fuel System Liquid

    Size: NG12NW9-90°

    Hose fitted: PA 9.0 x 11.0

    Material: PA12+30%GF

    Operating Pressure: 5-7 bar

    Ambient Temprature:  -40°C to 120°C

     

  • P2F plastic quick connectors NG8NW8-90° NG SERIES Fuel System Liquid

    P2F plastic quick connectors NG8NW8-90° NG SERIES Fuel System Liquid

    Item:P2F plastic quick connectors NG8NW8-90° NG SERIES Fuel System Liquid

    Media:  NG SERIES Fuel System Liquid

    Size: NG8NW8-90°

    Hose fitted: PA 8.0 x 10.0

    Material: PA12+30%GF

    Operating Pressure: 5-7 bar

    Ambient Temprature:  -40°C to 120°C

     

  • P1F plastic quick connectors NG8NW8-0° NG SERIES Fuel System Liquid

    P1F plastic quick connectors NG8NW8-0° NG SERIES Fuel System Liquid

    Item:P1F plastic quick connectors NG8NW8-0° NG SERIES Fuel System Liquid

    Media:  NG SERIES Fuel System Liquid

    Size: NG8NW8-0°

    Hose fitted: PA 8.0 x 10.0

    Material: PA12+30%GF

    Operating Pressure: 5-7 bar

    Ambient Temprature:  -40°C to 120°C

     

  • V38W plastic quick connectors NW40-ID40-0° for VDA Cooling Water  VDA QC

    V38W plastic quick connectors NW40-ID40-0° for VDA Cooling Water VDA QC

    Item:V38W plastic quick connectors NW40-ID40-0° for VDA Cooling Water  VDA QC

    Media:  VDA Cooling Water

    Buttons: 2

    Size:  NW40-ID40-0°

    Hose fitted: NW40 to PA 40.0×45.0

    Material: PA12+30%GF

    Operating Pressure: 0.5-2 bar

    Ambient Temprature:  -40°C to 120°C

     

  • V36W plastic quick connectors NW40-ID40-0° for VDA Cooling Water  VDA QC

    V36W plastic quick connectors NW40-ID40-0° for VDA Cooling Water VDA QC

    Item:V36W plastic quick connectors NW40-ID40-0° for VDA Cooling Water  VDA QC

    Media:  VDA Cooling Water

    Buttons: 2

    Size:  NW40-ID40-0°

    Hose fitted: PA 40.0×45.0

    Material: PA12+30%GF

    Operating Pressure: 0.5-2 bar

    Ambient Temprature:  -40°C to 120°C

     

123456 Next > >> Page 1 / 6